Instructional Technology (MED) #college #education, #online #programs, #graduate #degrees, #georgia #graduate #degrees, #georgia #undergraduate #degrees, #georgia #university, #georgia #colleges, #georgia #online #degrees, #kennesaw, #kennesaw #state, #bagwell #college #of #education, #bagwell #college, #instructional #technology, #georgia #elementary #education, #georgia #secondary #and #middle #school #education, #inclusive #education, #georgia #teacher, #becoming #a #teacher, #masters #degree, #specialist #degree, #doctoral #degree, #


#

M.Ed. Overview

Program Description

The Master’s Degree satisfies requirements for an S-5 certification (service field) in Instructional Technology and increases a T-4 certification to a T-5. However, to qualify for the new S-certification and the certificate upgrade, graduates must pass the GACE assessment in Instructional Technology and add the new field to their GaPSC certificate.

*NOTE – Please check with the GaPSC to ensure you will receive an upgrade upon graduation. You should also check with your school/district to determine if you will receive a salary increase.

*NOTE – You do NOT need to be working in an Instructional Technology position to receive the upgrade! You can remain in the classroom.

*NOTE – You must “attempt” the GACE in order ” graduate .” You must “pass” the GACE to add the new ITEC certification and upgrade your existing Georgia teaching certificate.

The Master’s Degree in Instructional Technology prepares candidates to serve as technology coaches/facilitators in P-12 schools. Candidates who successfully complete the program are prepared to effectively utilize technology to support student learning of content; to teach technology applications, and to provide professional development, mentoring, and basic technical assistance for other teachers who require support in their efforts to apply technology to support P-12 student learning.

The Master’s Degree in Instructional Technology prepares and develops teachers to direct school improvement toward higher levels of student achievement through the use of technology. It is designed for participants who have a T-4 Teaching Certificate. This program enables experienced teachers to complete the Master’s program in six semesters. Candidates will complete 36 hours of specialized course work taught by full and part-time graduate faculty and experienced technology specialists. The program will be delivered in cohorts offered in an online format.

All students must purchase a Chalk Wire account (

$82) online from the KSU Bookstore if they do not already have an active account.

Sample Program of Study:

SEMESTER I – Spring
ITEC 7400 21st Century Teaching and Learning
ITEC 7430 Internet Tools in the Classroom

SEMESTER II – Summer
ITEC 7480 Introduction to Online Learning
Elective

SEMESTER III – Fall
ITEC 7470 Educational Research
ITEC 7481 Designing Developing Online Learning or other elective – see advisor

SEMESTER IV – Spring
ITEC 7460 Professional Learning Tech Innovation
ITEC 7482 Facilitating Online Learning or other elective – see advisor

SEMESTER V – Summer
ITEC 7305 Data Analysis School Improvement
ITEC 7445 Multimedia and Web Design Elective

SEMESTER VI – Fall
ITEC 7410 Instructional Technology Leadership
ITEC 7500 Capstone Experience Portfolio

Please gather your teaching certificate, evaluation form, mentor form, and resume before applying so you can upload these documents during the application process.

  1. Complete the Online Graduate Application
    Please note that GRE is NOT an admission requirement for this program. The application above is general to all graduate programs, some of which do require GRE. This program is not one of them.
  2. Obtain and submit official transcripts from EACH college attended, including those institutions where degrees were NOT earned. Official transcripts are those in a university sealed envelope. Your transcripts should reflect at least a Bachelor’s degree with at least a 2.75 GPA (on a 4.0 scale).

Graduate Admissions
3391 Town Point Drive
Mailbox #9109
Kennesaw, GA 30144

  • Obtain and submit a copy of your Georgia Teaching Certificate or a departmentally-approved equivalent. To print a copy of your Georgia clear, renewable certificate, you may log onto www.gapsc.com. The Department of IT recognizes and appreciates that many independent schools and 21st century learning environments do not require educators to hold traditional state teaching certification. In such instances, the Department will make a case-by-case determination as to whether the educator’s qualifications are sufficiently equivalent to a traditional teaching certificate and/or whether the educator has the background necessary to ensure successful completion of the program.
  • Obtain and submit ONE Evaluation Form .
    This should be from a school level administrator (form provided above).
  • Obtain and submit ONE Mentor Form.
    This should be from a current administrator, Instructional Lead Teacher, Instructional Technology Specialist, media specialist, teacher, etc. at the building or district levels with instructional technology knowledge and experience. (form provided above).
  • Obtain and submit a Professional Resume documenting statement of purpose for wanting the degree, education, teaching experience, volunteer and service accomplishments, and record of leadership activities. Your resume MUST reflect, at least, ONE year of teaching experience.
  • International Applicants Only: Please contact 770-499-3002 for all international admission requirements related to your citizenship or visa status OR link to the Graduate International Admissions page: http://www.kennesaw.edu/graduate/admissions/international_admissions.php
  • Deadline
    Contact Us

    *The M.Ed. in Instructional Technology is a highly competitive program. There is a limited number of applicants that we can accept per semester. Once we meet our capacity for the enrolling semester, you may be asked to update your application to a future semester at no charge.


    Does Becoming a Music Producer Interest You? #becoming #a #music #producer,music #producer,producing #music,music #production #career


    #

    BECOMING A MUSIC PRODUCER

    So you are interested in becoming a music producer? Be prepared to wear many hats! The producer of today may be asked to fill many roles that in the past were traditionally specialized jobs. Here is a list of many of the roles you may be responsible for:

  • Maintain a recording budget
  • Artist
  • Composer
  • Arranger
  • Collaborate with an artist/songwriter
  • Create a vision for the song/artist
  • Adapt the lyrics and melody of a song
  • Change the chord structure or arrangement
  • Hire musicians or programmers
  • Make a demo
  • Book rehearsals
  • Manage the musicians’ performances and ideas
  • Negotiate recording studio rates
  • Engineer
  • Produce performances
  • Perform
  • Edit and pitch correct performances
  • Mixing
  • Mastering

    Panicked yet? Well don’t be, no one person can master all of these skills. You can specialize in any one or several of these roles and still make great music. But, becoming a music producer requires that you understand the big picture of the whole production process and where you fit in. Understanding your strengths and weaknesses will help you assess what roles you can fill and where you will need support.

    Assess Your Skills

  • What are you good at?
  • Are you proficient with a musical instrument?
  • Do you have engineering skills?
  • Do you have great people skills?
  • Are you good with computers and technology?
  • Do you understand music theory?
  • Are you a songwriter or artist?
  • Do you already produce your own music?
  • Do you need additional education and schooling?

    You are here because you obviously have a passion for music. If you are not proficient in any of these skills, do not be alarmed. Look at these questions. Do any of these skills excite or interest you? If you are truly interested in becoming a music producer, you must study at least one of these skills and know a bit about how the others work.

    If you do have some of these skills, can you find a way to bring those skills into a recording situation? If you are studying an instrument, can you bring those skills into a recording studio? If you are good with people how can you make that fit in to a music production situation? If you are good with computers and technology can you use those skills to produce music?

    The Answer Is: Yes! Absolutely Yes!

    Regardless of level of skills you have now, your passion for producing music is already there. If you are developing those skills, then becoming a music producer will come naturally because it is what you are most excited about.

    I came into music production by studying guitar. I was a horrible guitar player! But the passion I had for playing my guitar and understanding it as completely as I possibly could led me to a career in engineering audio. When I started the study of audio engineering and music production, it came naturally to me. I realized, many years later, that my fascination with how records sounded and the attention to detail I paid when listening fit perfectly into the role of being an engineer and music producer.

    Every skill has a place in the music production process. If you are passionate about your skills, people will want to hire for them. Whatever skills you have, bring them into a recording studio situation, no matter how small. The more skills you bring to the table, the more involved you will be in recording, and the more you will learn about how the whole production process works. If becoming a music producer is your goal, nothing teaches better than experience!

    Getting The Gig

    Whenever someone asks me how they can get production or engineering jobs, I always tell them the same thing. Get a job in a recording studio that records the style of music you want to produce. The reason for this is simple. Where else are you going to meet people that are making a living doing what you want to do? Those people are your future clients! If you put in the effort and hang around long enough, I guarantee that you will get a chance to show what you are capable of. If you have a full time job already, you can still work in a studio. Many recording studios need people to work nights and weekends.

    These Are Some Of The Benefits Of Working In A Recording Studio:

    Learn From Professionals

    Where else are you going to get to watch professional producers, engineers, composers, arrangers, studio musicians, programmers and performers do their thing? A recording studio. Pay attention! You absolutely need to absorb as many ideas, problem solving skills and methods professionals use to produce music. You will see these producers and engineers do amazing things. You will also see then create catastrophic failures. Both are equally important! Either way, you will get valuable insights and ideas about what to do, and more importantly, what not to do.

    Make Connections

    The best way to make connections in the recording studio is to make yourself a valuable part of the recording session to the client. By showing extra effort and attention to each client, they will quickly grow used to your helpful ways. Learn to think like the people you are working for so that you are handing them what they want before they have a chance to ask. The path to becoming a music producer is learning to think like the people who make a living doing what you want to do. The attention to detail you pay in the recording session will result in work down the road. When a client calls a recording studio and asks specifically for you to assist the recording session, you will know you are on the right track.

    Climb The Ladder Of Success

    One of the biggest kept secrets to becoming a music producer is to be relaxed and confident, even if you are ‘losing it’ on the inside. Your good vibes and confidence in the studio will get you more work than your skills. If the people you are working with don’t feel comfortable with you, they will not want to work with you. Who wants to work with someone they don’t feel comfortable with. You must be composed, confident and aware of everything that is going on around you. By studying hard and watching the production process unfold, day in and day out, you will always know what to do and when to do it. Remember, the process should be fun and creative, so always keep that attitude in mind. This positive attitude will set you on the path toward becoming a music producer.

    Gain Access To The Recording Studios

    After you have built a bond of trust with the studio owner, you may be allowed to use the studios, nights or weekends if there are no paying clients. This is a great opportunity to try out many of the production techniques you have learned by being in professional recording situations day in and day out. I cannot stress enough how important it is to take advantage of these opportunities! You must practice the lessons you learn in the studio till they become second nature. As I always say, record your friends and make your mistakes with them. This way, you won’t make the same mistakes with your paid clients.

    Conclusion:

    Step by step, the path to becoming a music producer involves dedication and desire to understand of the art of music production. Work in a recording studio so you will meet and work with professionals. Remember, they are your teachers and your future clients. Record yourself and others as often as you can. There is no shortage of people who want to be a star! Every recording you make will teach you skills and fuel ideas that make the next productions better. They will also present you with problems that you must learn how to solve. The more music you produce, the more you will learn to streamline your production process. The more you practice the closer you will get to your goal of becoming a music producer FULL TIME! .

    Establishing a Music Production Career

    How to Become a Music Producer Part I

    How to Become a Music Producer Part II

    The Music Production Process

    Get Monthly Music Production, Engineering and Career Development Tips By Signing up for:

    The Music Production Guide E-Zine.

    Fill in the box below or


  • Becoming a Medical Instrument Technician: Job Description – Salary Info #medical #instrument #technician, #becoming #a #medical #instrument #technician: #job #description # # #salary #info


    #

    Becoming a Medical Instrument Technician: Job Description & Salary Info

    Career Information

    Job Description and Duties

    The maintenance, repair and installation of medical equipment entails a host of more specific job duties. These may include replacing missing parts, maintaining records of repair jobs, conducting tests on equipment, demonstrating how equipment works and cleaning medical instruments. You may also need to use a range of tools, such as bar-code readers, gas sterilizers, autoclaves and high vacuum sterilizers.

    Job Prospects and Salary Info

    The reported 30% growth rate by the BLS is more than twice the average for all occupations nationwide. One reason for this high growth is the projected increase in the number of individuals, particularly the elderly, who are expected to rely on medical equipment to function. As of 2014, the mean annual wage of repairers nationwide was about $49,000, according to the BLS. Individual salaries ranged from around $28,000 or less in the lowest 10th percentile to over $75,000 in the 90th percentile.

    Career Paths and Specializations

    Hospitals, electronic repair maintenance companies and commercial equipment wholesale companies employ the majority of medical equipment repairers. To work in these and other industries, you can choose to specialize in repairing one or more pieces of equipment, such as CAT scanners, defibrillators, operating tables and electric wheelchairs. The amount and extent of training may vary by the piece of equipment.

    Career Skills and Requirements

    To become a medical equipment repairer, you’re typically expected to complete at least an associate’s degree in a field such as biomedical technology. A bachelor’s degree could be required depending on your area of specialization. If you only intend to work on less advanced medical equipment, such as wheelchairs and hospital beds, you might only need a certain amount of on-the-job training. Most of this training is done under the supervision of more experienced professionals. Although some employers prefer that you become certified, this is not a requirement.

    Useful Skills

    You’ll need to rely on a number of hard and soft skills to successfully complete your professional tasks. These generally include:

    • Making efficient and optimal use of time
    • Expending physical energy for extended periods of time and in awkward positions
    • Adapting to a range of different technical requirements
    • Merging effective hand-eye coordination with manual dexterity while making repairs
    • Identifying and solving intricate mechanical problems

    Job Postings from Real Employers

    In January 2013 there were a variety of postings for medical equipment repairers. Many of the employers required only a high school diploma in addition to specific technological skills and work experience, but even this varied depending on the type of equipment successful candidates were required to work on.

    In addition, many of the jobs listed duties that went beyond equipment repair, including processing documentation, responding to telephone calls and facilitating the rental of medical equipment. Below are some actual job postings for medical equipment repairers:

    • A hospital in Chicago advertised for a medical equipment technician with at least a high school diploma or GED, basic electronics knowledge and a demonstrated ability to operate test equipment. The job placed particular emphasis on daily preventive maintenance and recurrent clinical inspections.
    • A medical center in the Bronx, NY, looked for a biomedical equipment technician with at least an associate’s degree comprising biomedical technology courses plus two years of professional experience in the field. Duties included maintaining anesthesiology equipment and providing assistance with procedural preparations. The successful candidate would also be responsible for ordering supplies.
    • A medical center in Marinette, WI, advertised for an equipment technician with at least a high school diploma, sufficient math and writing skills, organizational capabilities and basic computer proficiency. The successful candidate would be required to maintain and repair a variety of patient-care equipment, such as portable oxygen tanks.

    How to Stand Out

    One of the most effective ways of distinguishing yourself among other candidates is by obtaining certification from a professional organization, such as the Association for Advancement of Medical Instrumentation (AAMI). The AAMI offers three designations, which include Certified Biomedical Equipment Technician (CBET), Certified Laboratory Equipment Specialist (CLES) and Certified Radiology Equipment Specialists (CRES).

    Candidates for certification are typically required to hold at least an associate’s degree in a field such as biomedical technology and have two years of full-time professional experience in the field. Exceptions may be made if you have a sufficient combination of academic and work experience. Once the application fee is paid, you’ll be required to pass an examination. In order to maintain certification, you’ll need to accumulate a certain amount of activity points and keep a practice journal for a period of three years. In many cases, you can even find employers who will pay for you to become certified.

    Other Careers to Consider

    Computer, ATM and Office Machine Repairers

    If you’d prefer a hands-on career in technology repair don’t want to deal with the biohazards of medical equipment repair, you could consider becoming a computer, ATM and office machine repairer. As such, you’d install, maintain and repair a variety of equipment, such as computer hardware, electronic kiosks, office printers and computer monitors.

    The BLS projected that national employment of these repairers will only grow by about 7% through 2020, which is rather sluggish compared to the 14% average rate for all occupations over this period of time. As of 2011, the mean annual wage of these repair professionals nationwide was about $38,000.

    Medical and Clinical Laboratory Technologists and Technicians

    If you want to work in healthcare, but closer to the medical than the technological side, you might consider a career as a medical and clinical lab technologist or technician. In this career, you’d typically work in labs analyzing bodily fluids, collecting tissue and blood samples, and operating microscopes. There are some differences between technologists and technicians in this field. Technician jobs may only require an associate’s degree or postsecondary training. However, to become a technologist, you’d need to obtain a bachelor’s degree. You’d also have more complex tasks than a technician and might be responsible for supervising technicians. In some states, licensure is a requirement for both these professionals.

    The BLS estimated the national employment of technologists would grow by about 11%, while technician jobs could increase 15% during the 2010-2020 decade. As of 2011, the mean annual wage for both of these professionals was about $39,000.

    Related Articles

    Medical equipment is vital technology. Assuming responsibility of it means assuming responsibility, by extension, for patients’ lives. But if you’d.

    What are the pros and cons of a medical equipment technician career? Get real job descriptions, salary statistics and job outlook information to.

    Popular Schools


    Canadian Truck Driver Jobs #canadian #truck #driver #jobs #jobs #in #trucking. #jobs, #class #1 #driving #jobs #truck #driving #jobs #trucker #driving #jobs #owner #operator #trucking #companies #bc,vancouver,surrey,delta #toronto,mississauga, #alberta,edmonton,calgary,red #deer #ontario, #saskatchewan,saskatoon,regina, #manitoba,winnipeg #az #driving #jobs #truck #driver #become #a #truck #driver #professional #truck #driver #truck #driver #companies #truck #driver #education #truck #driver #hiring #truck #driver #insurance #truck #driver #leasing #truck #driver #licence #cdl #truck #driver #how #to #become #a #truck #driver #class #a #truck #driver #truck #driver #pay #becoming #a #truck #driver #over #the #road #truck #driver #truck #driver #license #truck #driver #recruiter #salary #for #truck #driver #truck #driver #class #truck #driver #truck #driver #application #resume #for #truck #driver #truck #driver #job #description #truck #driver #job #in #canada #truck #driver #job #canada #truck #driver #job #search #local #truck #driver #job #local #driving #jobs #cdl #driving #jobs #otr #driving #jobs #train #driving #jobs #bus #driving #jobs #class #b #driving #jobs #long #haul #truck #driving #truck #driving #safety #truck #driving #company #truck #driving #information #local #truck #driving #job #team #truck #driving #looking #for #truck #driving #job #over #the #road #truck #driving #truck #driving #positions #truck #driving #business #truck #driving #course #truck #driving #training #jobs #local #truck #driving #truck #driving #training #careers #in #truck #driving #truck #driving #test #truck #driving #paid #training #truck #driving #truck #driving #career #truck #driving #companies #hiring #truck #driving #classes #delivery #truck #driver #jobs #new #truck #driver #jobs #local #truck #driver #jobs #tanker #truck #driver #jobs #haul #truck #driver #jobs #part #time #truck #driver #jobs #cdl #truck #driver #jobs #team #truck #driver #jobs #dump #truck #driver #jobs #class #a #truck #driver #jobs #long #haul #truck #driver #jobs #owner #operator #truck #driver #jobs #semi #truck #accessories #semi #truck #parts #semi #truck #games #used #semi #trucks #truck #driving #jobs #in #canada #truck #driving #jobs #in #ontario #truck #driving #jobs #in #tn #truck #driving #jobs #in #alberta #truck #driving #jobs #in #manitoba #truck #driving #jobs #in #usa #owner #operators #trucking #owner #operators #truck #owner #operators #truck #driver #owner #operators #owner #operators #trucking #jobs #truck #transport #companies #western #truck #school #truck #training #schools #truck #job #truck #companies #walmart #trucking #jobs #alaska #trucking #jobs #all #trucking #jobs #heavy #haul #trucking #jobs #nc #trucking #jobs #trucking #jobs #hiring #usa #trucking #jobs #trucking #jobs #in #california #class #a #trucking #jobs #trucking #jobs #in #alberta #dedicated #trucking #jobs #cdl #trucking #jobs #schneider #trucking #jobs #trucking #jobs #in #nc #truck, #truck #driver, #hazordous, #trucking, #fuel, #tractor #trailer, #logistics, #az,dz, #class #1 #owner #operator, #company #driver, #contract #driver, #haulage, #fast #card #truck, #truck #driver, #hazordous, #trucking, #fuel, #tractor #trailer, #logistics, #az,dz, #class #1 #owner #operator, #company #driver, #contract #driver, #haulage, #fast #card #


    #

    Canadian Truck Driver Jobs / Jobs In Trucking Is your link for finding jobs in the trucking Industry that you have always wanted. Jobs in Canadian trucking Its easy just click on the province of your choice and you will find trucking companies from that region that are looking for you right now.

    Just click on the trucking company that you want to look at and apply online.

    There are no memberships to join and you don’t have to log on to anything. The information that you fill out will go directly to the employer that you are looking at and nobody else. If you wish to post a resume you can now do so at our new affiliate site www.mycdnjobs.com

    You will also find in each province a contact list of other trucking companies this list shows contact information for those companies.

    You can also view the current listings below click on the Company name to find out more about the positions available to you. Owner Operators Company Drivers Wanted Today.

    Canadian Truck Driver Jobs web site and its advertisor’s are proud of our Professional Truck Drivers who drive across our roads safely everyday. If you bought it a truck brought it.

    Terms of employment: full time 40 to 60 Hours / Week, permanent, Other benefits: paid layover and HAZMAT premiums, Quarterly Safety, and Clean inspection bonus, Fuel efficiency bonus

    THE ROLE: The Truck Driver ensures an efficient and timely pick-up of donated goods and materials thereby assisting to provide a cost effective service, a positive impression to the public and one that promotes the goals of the Association. The Truck Driver navigates through the GVRD region for pickups/drop offs in a 3-Ton Truck. The person in this position is also expected to drive throughout the Lower Mainland, placing donation bins at various locations. Tasks between driving and placing donation bins will be assigned on an as needed basis.

    Residential Curbside Collection Drivers Progressive Waste Solutions is the leader in non-hazardous solid waste management in North America. As Canada?s leader in waste services, we are continuously looking for energetic people to proudly represent our company and products. We have a dynamic culture and are dedicated to the continued progress and growth of our residential recycling programs in addition to regular municipal waste removal. Currently, at our Barrie, ON, facility, we are looking for Residential Curbside Collection Drivers.

    AZ (Class 1) Truck Driver | Transport

    NB Solution Inc. is a search firm recruiting nationwide operations professional, executives and management for the logistics, distribution and supply chain management industries. With over 50 years of combined logistics experience, we ve continued to build our reputation on high-level service in the Canadian market.

    Eco-Energy Transportation, one of the largest bio-fuels distribution and marketing companies in North America, is currently looking for class A CDL, Hazmat and Tanker Endorsed Drivers in this area with preferably 5 years of hazmat experience.

    Owner/Operators Required Immediately For Our Dry Bulk Division

    Operating within Alberta Very High earning potential per month

    You must have a minimum of 2 yrs Pnuematic Experience

    AZ Delivery Driver/Specialist – Oakville Location

    GE Power Water currently has an opening for an AZ Delivery Driver for the Oakville Area

    The successful candidate will drive a tractor-trailer combination capacity of at least 80,000 lb GVW, to transport and deliver hazardous and non-hazardous materials into the customer tanks

    Iron Wing is a Busy oilfield trucking company in the Whitecourt Ab areas and has immediate openings for class 1 Tank truck operators and class 3 Combo Vac and Hydro Vac operators. Excellent wages and immediate medical benefits upon hire.

    Experience is a definite asset, however training is available.

    Owner Operator Flat Deck Division

    Owner Operators Required Immediatly For Our Flat Deck Division Based In Edmonton.

    You must have a mimimum of 2 yrs Tractor Trailer Experience.

    Be Safety Orientated

    Have a positive attitude.

    Located in the beautiful Okanagan, we are seeking qualified heavy haul driver for trucking company located in West Kelowna, BC, however it is not necessary to live in BC (have drivers in AB/SK/ON).

    MUST HAVE experience with Over Dimensional and Over weight loads and be able to cross the border. Minimum three years experience.

    Single and Team Company Highway Drivers and Owner Operators.

    Forbes Hewlett Transport Inc. is currently looking for AZ Company drivers

    Must have 2 years verifiable experience in LTL and TL shipments.

    You will operate various transport vehicles, trailers, bins and other equipment and perform daily safety and maintenance inspections.

    Completing logs and inspection documentation will be part of the job, as will maintaining a clean appearance of all vehicles.

    To be considered, you must have:

    • A Class 1 or Class 3 Driver’s license with air brake endorsement;

    Based in Nisku, Alberta (Travel Throughout Western Canada)

    W.F. Welding Overhead Cranes is a leading fabricator of structural steel, overhead cranes, and crane door systems, and is located in Nisku Industrial Park, south of Edmonton, Alberta.

    About the Opportunity

    W.F. Welding Overhead Cranes currently has an opening for a Class 1 Driver who will be based in Nisku, Alberta and traveling throughout Western Canada.

    To apply for this position, you will need a Class 1 License and a clean driver’s abstract.

    Bulk Chemical Truck Driver

    Canada Colors and Chemicals Limited (CCC) has been serving the needs of the Canadian chemical and plastics markets since 1920. Today, CCC is one of the largest independent chemical distributors in Canada, and the 10th largest chemical distributor in North America.